Overview
Gravity drainage and sewerage pipe for underground networks and for soil, waste and vent systems inside buildings.
Key specifications
Types available
- Gravity sewer pipe — 110–500 mm, to DIN 19534, for underground sewerage
- Drain pipe — 40, 50, 75, 110, 125 and 160 mm, to DIN 19531, for waste and soil discharge inside buildings
- Underground drainage — 110, 160, 200, 250, 315 and 400 mm, to BS 4660, for drainage under gardens, driveways and roads
- Soil and ventilating pipe — 82, 110 and 160 mm, to BS 4514, for above-ground soil and vent stacks
Storage and handling
Store pipe in a well-ventilated, shaded area. Where pipe must be stored in the sun, cover it so that the pipe ends stay open for air to pass through, which keeps heat build-up to a minimum. Store on level ground clear of stones and sharp projections, on timber bearers at least 75 mm wide spaced one metre apart. Stack loose pipe no more than one metre high and bundles no more than three metres, with nested pipe at the bottom of the stack. Keep elastomeric rings in the shade and fit them only when the pipe is in the trench and ready for jointing. Store solvent cement and cleaning fluid in a cool, dry place.
Quality
Material is tested in our own laboratory before and after it becomes pipe. See our quality and certifications.
